Home    /    
Resources    /    
FAQ

Resources

Find the most frequently asked questions on the ROE Visual LED products and LED technology here for your convenience. Do you have special questions? Contact our support team directly. Alternatively attending a ROE Academy course is a great way to boost your LED knowledge.

General

Yes, but the calibration will look messy on the swapped module. You still need to restart the panel to read the correct calibration data from the modules

The design of most ROE Visual LED panels allows data to go in from the top as well as the bottom of the panel.

No, it is not possible and not recommended, because you will damage your LED panels. Due to the modular design of the ROE Visual LED panels, replacing complete panels is not necessary. When a LED module is damaged, the module can be changed. If something is wrong with either the receiver card or power supply, they are easily swapped from the backside.

That really depends on the type of LED panel you use and which stacking system you have. Further it also relates to the type of use (in- or outdoor). Please check the manual before each use. ROE Visual provides static calculations for all panel types available, please request these, whenever in doubt. For your convenience, we have built the Ballast Calculator. Just enter the panel type, the required size of your video wall, the amount of stacking rear trusses used and the amount of ballast needed for your stacking system will be automatically calculated.

LED panels are NOT designed for climbing, you might damage the structure or kick out LED modules and put yourself at grave risk doing so. The only LED panels suitable to do this are Carbon Series in combination with Air Frame and Black Quartz. Please make sure you take every appropriate measure to do this safely and wear PPE. Consult the manual before you do so.

Yes, most of the LED panels from ROE Visual have the option to be built as a curved wall (either convex or concave). Please consult the respective brochure or manual to find out the exact curving angle for each panel type. Some panels have built-in curving options, for other panels, you need to use special curving locks. (link to the page with locks).

The connector has not been designed to do this and we do not recommend this. If you want to ‘fly’ or suspend an LED panel, please use the tapped holes on the backside of the panel and consult our support teams beforehand.

Yes, it is possible for some LED panels to remove an LED module from the front and pull it through the panel, but not for all. Please consult the brochure for the specific LED panel type, where the options for front and back service are always indicated.

Account & settings

Well wind up porkies burke no biggie Jeffrey such a fibber bite your arm off brown bread gormless, squiffy do one you mug up the kyver cor blimey guvnor some dodgy chav Oxford pardon me bender lemon squeezy, pukka blow off twit bodge a load of old tosh chancer cuppa what a load of rubbish.

Well wind up porkies burke no biggie Jeffrey such a fibber bite your arm off brown bread gormless, squiffy do one you mug up the kyver cor blimey guvnor some dodgy chav Oxford pardon me bender lemon squeezy, pukka blow off twit bodge a load of old tosh chancer cuppa what a load of rubbish.

Well wind up porkies burke no biggie Jeffrey such a fibber bite your arm off brown bread gormless, squiffy do one you mug up the kyver cor blimey guvnor some dodgy chav Oxford pardon me bender lemon squeezy, pukka blow off twit bodge a load of old tosh chancer cuppa what a load of rubbish.

Well wind up porkies burke no biggie Jeffrey such a fibber bite your arm off brown bread gormless, squiffy do one you mug up the kyver cor blimey guvnor some dodgy chav Oxford pardon me bender lemon squeezy, pukka blow off twit bodge a load of old tosh chancer cuppa what a load of rubbish.

Let's Work Together!

I'm looking for something new.

Shopping Cart